Electric Fireplace Wall Hanging Ideas

The wall-mount electric fireplaces are ready to use right from the box. They're an excellent way to add ambience without venting or reworking.

They're usually heavy and require careful installation. Follow these steps to hang your brand new electric fireplace correctly.

1. Connect the Brackets

A wall-mounted or recessed electric fireplace instantly enhances the appearance of any room. It's the ideal solution for homes without an existing fireplace opening or apartment dwellers.

First, you must decide where to put your new electric fire. It's important to find an area that isn't susceptible to moisture and at least a few inches away from furniture, drapes and other areas with a lot of traffic. Mark the wall with layout marks to indicate the top and bottom plates for the fireplace frame.

Use a tool such as a drill to make exploratory holes in the wall, examining for studs with a detector and marking on the drywall the location of the fireplace mounting brackets. Then patch and paint the drywall or create a wall to prepare it for fireplace installation.

Depending on the wall-mounted fireplace, you could be required to install the firebox and screen as one unit or separate them with the use of a wall bracket. If you're uncertain about your capability to tackle this task on your own, think about hiring a general contractor or experienced carpenter.

There is templates included with the majority of electric fireplaces. However it is recommended to keep a pencil level handy and a pencil to mark the exact location where the wall brackets will be installed. Before drilling, make use of the template to check that the power cable of the fireplace can reach from the place of installation to an outlet near by to plug it in.

Install the drywall as clean and as flush as is possible to give the fireplace a neat appearance. Add a trim piece to the bottom edge, and then sand and paint the entire frame to give it a finished appearance.

You will need to insert the slots or hooks on the back of most electric fireplaces mounted on walls into the brackets that mount them. Make sure that the slots or hooks are properly aligned prior to connecting the fire to the wall brackets. Once the fire is in position you can add additional elements, such as crystal embers, driftwood log pieces, or decorative rocks.

2. Check the Bottom Bracket

The space above the mantel, fireplace, or chimney breast is a great spot for hanging artwork. However, there's a fine line between an artistic arrangement & one that is distracting from the overall appearance of the fireplace's design.

Generally, the rule of the thumb is that a painting should be about 80 percent of the size of the fireplace or mantel it is placed above. This will allow it to be proportional and look aesthetically pleasing on the wall. This guideline may be affected by other ornaments and decorative pieces on the mantel.

If you're planning to hang a picture above your electric fireplace, it's crucial that the frame is made from glass or other material that can withstand high temperatures. If you're unsure then a quick test using a cloth that is heat-sensitive will reveal whether the frame is suitable for this kind of installation.

The possibility of destroying artwork by smoke and stray heat is a common issue when displaying artwork on the flames of a fireplace. Although this is rarely an issue when using a traditional gas or wood-powered fireplace, it's worth checking the manufacturer's guidelines if planning to use an electric fire that is wall-mounted.

Most electric fires come with an installation bracket that can be attached to the wall hanging electric fireplace using hanging screws or a wall-mounted fixing system. If the latter is the case, it is recommended to make exploratory holes in a distinct area of the wall mounted modern electric fireplace (relevant site) prior to when you attempt to mount your electric fire. You can then utilize a pipe and cable finder to make sure there aren't any cables or pipes close to the location where you want to mount your fire.

If so, you could place your fire on the electrical socket or move it to a different spot. If you choose to move it to a new spot, you'll need to ensure that the power cable can reach from the fire to the electrical socket. this is particularly important for older homes or homes with solid walls. If not, your electric fire won't be able to work properly. Certain models include a template that indicates where to drill holes for this purpose and others require a spirit level and pencil to mark the proper locations on your wall mounted electric fireplace uk.

3. Connect the Power Cord

If you've installed a recessed electric fireplace, you may need to move the plug socket from the wall to behind the fireplace. This can create a sleeker look. Be sure to test your fireplace prior to making this change to make sure that everything functions as it should.

Another method of mount an electric fireplace is to frame space and incorporate it into the wall. This gives it a finished, traditional look and allows you to build an additional mantel. The owner's manual for the specific model will have details about framing, securing the fireplace, and wiring.

You can mark the position of your new electric fireplace on the wall with either a pencil or marker. Use a carpenter’s level to ensure that the installation area is flat and level. You can use a studfinder mark the location so you know you are drilling in a secure area.

After you've marked the location for installation then use your electric drill to make holes for the hanging screws or bracket screws. Follow the instructions in your owner's guide for this step. This is especially crucial if you're installing the fireplace into drywall. If you're not sure of how to go about it you can always consult an expert to do the installation for you.

You can also conceal power cords from view using an organizer kit for cables. These kits typically include sleeves, clips or boxes that can be used to bundle cables. You can use wire snakes or fish tape to guide the cables. If you don't want to cut the drywall, a powerbridge kit will provide a cleaner and more secure connection.

Additionally, you can disguise the wires by painting them with paintable covers or by tacking them to the wall and skirting boards. Be sure to keep the cover or tacks from the source of heat however. This will protect the cord from damage and also prevent accidental contact.

4. Connect the Adapter

A wall mount fireplace electric-mounted electric fireplace is an excellent option for home renovations or those who do not have the space or money to build gas fireplaces. They are simple to hang and are ready to use straight out of the box. They're an excellent alternative for those looking for an elegant, modern look or warmth from a fireplace. These units are designed to be displayed as artwork on any wall. They they can be recessed or not recessed at all, and are fully electric and have heating that is powered by a fan.

It's a good idea make an inventory of all the tools and equipment you'll require prior to starting the installation process. You can find the complete instructions on how to mount an electric fire in the user's manual. Some models will require you to fix the brackets directly to the wall. Other models may have an installation plate that is able to slide into slots or hooks on the brackets for mounting. If you are installing a recessed model it is important to make sure that all combustible substances are removed from the area around the installation. As a rule of thumb, these materials should be kept 3 feet from the front of the fireplace and 1.5 feet from its sides.

After you have checked all the parts after that, connect your electric fire and make sure it is working. This is an important step because it will guarantee that the flame effect screen and heater operate according to the specifications. This will give you a good idea of the final product's final position.

When you're sure that your electric fire is operating properly, you'll want to think about covering the power cord. This will keep the finished product neat. It is possible to achieve this by installing a new outlet that has a cord that can be hidden behind the unit. This will give your fireplace a seamless finish.